"Cloupor T8 150W Box Mod"
The Cloupor T8 packs a whooping 150 watts. The Cloupor T8 mod also takes dual 18650 batteries. Please contact us if unsure of compatible chargers, and other accessories.
Caution: We recommend only using batteries with a Continuous Discharge Rate of 20A or higher!
1. Variable wattage from 7W-150W (0.1W increments from 7W to 100W, 1W increments from 100W to 150W)
2. Powered by dual IMR 18650 batteries; output voltage/current: 1.5-7.6V/20A (Max.)
3. Compatible with 0.15ohm~4.0ohm atomizers (0.5-0.8ohm suggested)
4. Magnets back cover, more convenient to take off the battery
5. IC board comes with self-heat dissipation system
6. Adjustable 510 pin
7. CPU temperature control system
8. OLED display shows battery percentage, watts, ohms, puffs, volts and CPU temperature
9. Instead of screen lock, it can be turned off
10. Micro-USB port for connecting PC
11. Reverse battery protection
12. Aluminum alloy body
1. This battery CAN'T be charged directly, user have to take out the Li-ion battery out to charge, NO IMR 18650 battery comes with the box mod;
2. This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly;
3. The unit can not be charged through the USB port, which is used for upgrading firmware. Please take them out and charge them via a 18650 battery charger.
Size: Height 102mm; Width 55mm; Depth 25mm
Box Material: Aluminum Alloy
Each set contains:
1pc Cloupor T8 150W Box Mod
1pc Screw driver
3pcs Brass connect pin
4pcs Super magnet
1pc Little black box to contain the pins and magnets
1pc USB cable
1pc Notice card
1pc After sell service card
1pc User manual
Chargers, and accessories purchased separately