Please note: this T3d Tank uses the "Dual Coil" not the same as the single Coil T3s tanks.
This bottom coil clearomizer is made by Kanger. It has replaceable heads and takes 2.5ml of e-liquid at a time. With a bottom coil you get warm vapor which has a really clean flavor that does not cause the wicking issues that other designs can have. It fills form the bottom so if the head stops working when there is liquid still in the tank it can be easily replaced without having to drain the liquid out. It is very easy to fit, just unscrew the bottom atomizer head hold the tank upside down and fill with liquid and then screw the head back on. This new T3 version incorporates a "bottom coil", and thus doesn't need to be tipped on it's side to aid in "wicking". Filling with liquid is opposite from other types of Ego Clearomizers, as these must be filled from the bottom. Unscrew tube from knurled base for cleaning, to replace heating coil, and to fill with liquid. price is per each T3 Clearomizer. Replacement heating coils are available as well in different ohm versions located in the "Replacement Coil" category labeled as "Protank 3 coils". Note: knurled base incorporates the heating coil, and is replaced with the coil already built-in.
Please note: There is no warranty, returns, refunds or exchanges on cartomizers / clearomizers
To fill the new T3 Clearomizer; remove the T3 Clearomizer from your device / Ego battery. Turn the Clearomizer upside down, and unscrew the knurled base from the tube, tilt it to the side a little bit. Fill about 3/4 full with liquid, trying to not get liquid down the center tube. Screw the knurled base back on, and attach the Clearo to the battery. As you're using it, tilt it over, and roll around periodically to allow the liquid to wick into the base through the ropes.