Kanger T3s EGO Bottom Coil Clearomizer with Red / Pink colored Tube approx. 1.8ohm resistance, holds approx. 2.4ml liquid, with graduated liquid content markings. Standard 510 connection, with skirt for EGO style batteries. Please note: a 510 to EGO Atomizer adapter may be needed to use these on other devices. The built-in drip tip is permanently attached, and is non-removable. This new T3 version incorporates a "bottom coil", and thus doesn't need to be tipped on it's side to aid in "wicking". Filling with liquid is opposite from other types of Ego Clearomizers, as these must be filled from the bottom. Unscrew tube from knurled base for cleaning, to replace heating coil, and to fill with liquid. price is per each T3 Clearomizer. Replacement heating coils are available as well in a 2.5ohm version located in this category labeled as "T3". Note: knurled base incorporates the heating coil, and is replaced with the coil already built-in.
Please note: There is no warranty, returns, refunds or exchanges on cartomizers / clearomizers
To fill the new T3 Clearomizer; remove the T3 Clearomizer from your device / Ego battery. Turn the Clearomizer upside down, and unscrew the knurled base from the tube, tilt it to the side a little bit. Fill about 3/4 full with liquid, trying to not get liquid down the center tube. Screw the knurled base back on, and attach the Clearo to the battery. As you're using it, tilt it over, and roll around periodically to allow the liquid to wick into the base through the ropes.